ULTRA-1 ON-WALL/SURROUND SPEAKER
This versatile on-wall is the answer to many installation conundrums. It’s sleek, contemporary design with magnetic inset black fabric grille complements most any decor. At only 1-5/8-inches thick, 18-inches tall and just over 6-inches wide, it fits almost anywhere you can pull a wire through a wall. The pull-through ez-wire terminal cup makes connection a breeze. Add the features of either traditional mounting using the installed steel keyhole cups in back, or the super-fast and very secure direct-from-front screw-through mounts and you will soon find that this and it’s mate, the Ultra-3 are easily and quickly installed. The Ultra-1 provides true and clear RBH sound quality in locations previously unobtainable. Cement, plastered, block or brick walls, or the rental that won’t allow holes cut to mount a traditional in-wall. Other than whole-house audio capability, combine the Ultra-1 with the Ultra-3 LCR on-wall and an RBH Subwoofer and you’ve got a surround-sound system ready to go in minutes. The proprietary inverted aluminum cone 4-inch woofers and aluminum tweeters with textured phase plug are innovative and enable such a thin cabinet. We recommend pairing with an RBH subwoofer for best full-range performance. The Ultra-1 is a fast, easy sound solution.
Specifications
Model Name: ... Ultra-1
Series: ... Ultra
System Type: ... On-wall/Surround Speaker
Frequency Response: ... 100Hz-20kHz (±3dB)
Sensitivity: ... 84dB (2.83V @ 1 Meter)
Recommended Power: ... 20-120 Watts
Drive Units: ... (2) 4" (102mm) Proprietary Inverted Aluminum Cone Woofers
(1) 1" (25mm) Aluminum Diaphragm Neodymium Magnet Tweeter with Textured Phase Plug
Swivel Tweeter(s): ... No
Tweeter Protection: ... Yes
Crossover Frequency: ... 3,000 Hz
Crossover Slope: ... 12dB/Octave
Impedance: ... 8 Ohms
Cabinet/Color: ... MDF/Matte Texture Black with High-gloss End Accent Caps
Grille: ... Black Fabric
Finished Dimensions: ... 6-11/16" W x 18" H x 1-5/8" D
(170mm W x 457mm H x 41mm D)