Tannoy CMS 503ICT LP (each)

$220.15
Quantity :

CMS 503ICT LP

    Full range ceiling loudspeaker for installation applications
    50 Watts continuous, 200 Watts peak power
    5" ICT (Inductive Coupling Technology) point source driver for extended frequency range
    Ultra-shallow depth profile for applications where cavity space is restricted
    High durability design for constant heavy usage in demanding applications
    UL 1480 certified for general signalling systems
    UL 2043 certified for air-handling spaces
    Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
    Low insertion loss 30 W line transformer with easily accessible tapping switch
    Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
    Semi matt white finish fits unobtrusively in any environment
    Powder coated UV resistant perforated steel mesh grille with dust protection

Specifications

Performance
Frequency response (-3 dB) (1)     88 Hz - 50 kHz
Frequency range (-10 dB) (1)     77 Hz - 54 kHz
System sensitivity (1 W @ 1 m) (2)     89 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle     90 degrees conical
Power Handling (3)
Average     50 W
Programme     100 W
Peak     200 W
Recommended Amplifier Power     100 W @ 16 Ohms
Nominal Impedance (Lo, Z)     16 Ohms
Rated maximum SPL
Average     106 dB
Peak     112 dB
Transformer Taps (via front rotary switch)
70 V     30 W (165 ) / 15 W (330 ) /
7.5 W (660 ) / 3.75 W (1320 ) /
OFF & low impedance operation
100 V     30 W (330 ) / 15 W (660 ) / 7.5 W (1320 )
/ OFF & low impedance operation
Transducers
Low Frequency     1 x 130 mm (5.0") mineral loaded polypropylene
High Frequency     ICT
Physical
Enclosure
Backcan     Zinc plated steel
Baffle     Reflex loaded UL 94V-0 rated ABS
Grille     Steel, with weather resistant coating
Safety Features     Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design     Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36")
Recommended clamp torque: 1.5 Nm
Cable Entry Options     Cable clamp & squeeze connector for conduit up to 22 mm
Connectors     Removable locking connector with screw terminals with “loop through” facility
Compliance     UL-1480, UL-2043, CE
Dimensions
Bezel diameter     274.0 mm (10.79")
Front of ceiling to rear of backcan     98.6 mm (3.88")
Hole cutout diameter     253.0 mm (9.96")

UPC: 5035866175000


Manufacturers

Customer Service

Customer Support - New Audio Video