Tannoy CMS 403ICTe (each)

$264.55
Quantity :

CMS 403ICTe

The Tannoy CMS 403ICTe is a wide bandwidth, high power-handling and high sensitivity loudspeaker built around CMS 3.0 – the third generation of Tannoy’s revolutionary Ceiling Monitor System technology. Incorporating a newly refined version of Tannoy’s proprietary ICT™ point-source driver, the CMS 403ICTe has been re-engineered for optimum compatibility with Lab.gruppen commercial amplifiers while also delivering consistent broadband directivity, precise articulation for voice and music, and exceptional long-term… Read More
Features

        Newly refined 100 mm (4.0”) ICT transducer for greater durability and longevity
        High power & high sensitivity with extended frequency response
        Wide, controlled, constant directivity dispersion for optimum coverage
        Does not suffer from energy loss in the vertical plane at crossover as with two-way discrete designs
        Low insertion-loss, 30 W line transformer for a more powerful and dynamic performance
        Convenient front-tapping switch for settings
        Adjustable tilt angle with 360-degree rotation to accomodate difficult loudspeaker placements
        Three-clamp, self-aligning mounting system
        UV resistant baffle and grille

Specifications

Frequency Response (-3dB) (1)
    110 Hz - 22 kHz
Frequency Range (-10dB) (1)
    80 Hz - 24 kHz
System Sensitivity (1W @1m) (2)     88 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle     90 degrees conical
Coverage Angle (1 kHz to 6 kHz)     120 degrees conical
Directivity Factor (Q)     5.26 averaged 1 kHz to 6 kHz
Directivity Index (DI)     6.30 averaged 1 kHz to 6 kHz
Power Handling (3)     Average: 50 W
Programme: 100W
Peak: 200 W
Recommended Amplifier Power     100 W @ 16 ohms
Nominal Impedance (Lo,Z)     16 Ohms
Rated Maximum SPL     Average: 105 dB
Peak: 111 dB
Transformer Taps (via front rotary switch)     70V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation
100V:30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation
Crossover     7 kHz inductively coupled
TRANSDUCERS
Low Frequency     35 mm (1.38”) voice coil, treated multi fiber paper pulp cone
High Frequency     20 mm (0.79”) PEI dome
PHYSICAL
Enclosure     Backcan: Reflex loaded UL 94V-0 rated ABS
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features     Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design     Min / Max clamping range: 0.0 mm (0.0”) /
20.0 mm (0.79”)
Recommended clamp torque: 1.5 Nm
Connectors     Removable locking connector with screw terminals with “loop through” facility
Compliance     UL-1480, UL-2043, CE
Dimensions     
Bezel diameter     205.0 mm (8.07”)
Front of ceiling to rear of pod     147.6 mm (5.81”)
Hole cutout diameter     187 mm (7.36”)

UPC: 5035866174102


Manufacturers

Customer Service

Customer Support - New Audio Video