CVS 6
The compact, small footprint CVS 6 is a 150mm (6") full bandwidth blind mount model, specifically designed for all applications requiring the combination of excellent sonic quality for music and speech reinforcement,exceptional reliability and most critically - affordability.
The CVS 6 is supplied with an integral zinc-plated steel back can, with recessed termination box, the removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping… Read More
Features
Coaxially mounted 150mm (6") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter.
High power & high sensitivity with extended frequency response and very low distortion
Wide, controlled constant directivity dispertion for optimum coverage.
UV/weather resistant UL94V-0 ABS front baffle
Easily accessible tapping switch on front baffle.
Low insertion loss 60 W line transformer
Ferrofluid cooled neodymium HF
Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics
Specifications
Frequency Response (-3dB) (1) 79Hz - 21kHz
Frequency Range (-10dB) (1) 60Hz - 24kHz
System Sensitivity (1W @1m) (2) 91dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 93 degrees conical
Directivity Factor (Q) 7.7 averaged 1kHz to 6kHz
Directivity Index (DI) 8 averaged 1kHz to 6kHz
Rated Maximum SPL Average:109dB
Peak: 115dB
Power Handling (3) Average: 60W
Programme: 120W
Peak: 240W
Recommended Amplifier Power 120W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch) 70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation
100V: 60W / 30W / 15W / OFF & low impedance operation
Crossover 2.5kHz
TRANSDUCERS
Low Frequency 150mm (6.00") mineral loaded cone
High Frequency 19mm (0.75") coaxially mounted
PHYSICAL
Enclosure Back Can: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22mm
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings
UL-1480, UL-2043, CE
Hole Cutout Diameter 250mm (9.84")
Dimensions Bezel diameter: 279.5mm (11.01”)
Front of ceiling to rear of back can: 246.5mm (9.70”)
Front of ceiling to top of safety loop: 258.5mm (10.18”)
UPC: 750408387943