Tannoy CMS 801sub PI (each)

$358.90
Quantity :

CMS 801sub

CMS 801sub is a compact ceiling-mounted subwoofer unit specifically designed to complement the full range CMS Series and CVS Series in-ceiling loudspeaker systems; delivering low frequency extension into applications that require a combination of premium sonic quality and output level for music and speech reinforcement, as well as long-term operating reliability and ease-of-installation.

The 200mm (8") driver, with long throw multi fibre paper pulp cone, and a 2nd order 160 Hz passive crossover are mounted in a vented,… Read More
Features

        High Power & high sensitivity with low distortion
        UV/weather resistant UL94V-0 ABS front baffle
        Blind Mount & Pre Install options
        Easily accessible tapping switch on front baffle
        Low insertion loss 60W line transformer
        Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics

Specifications

Frequency Response (-3dB) 1     58Hz - 160Hz
Frequency Range (-10dB) 1     42Hz - 300Hz
System Sensitivity (1W @1m) 2      92dB (1W = 2.45V for 6 Ohms)
Rated Maximum SPL Average     112dB
Peak     118dB
Average (with THP60)     110dB
Power Handling Average     100W
Programme     200W
Peak     400W
Recommended Amplifier Power     200W @ 6 Ohms
Nominal Impedance     6 Ohms
Transformer Taps (via front rotary switch)     70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation

100V: 60W / 30W / 15W / OFF & Low Impedance operation
Distortion     10% Full Power (7.75V)
2nd Harmonic
70Hz: 1.22%
100Hz: 0.38%
3rd Harmonic
70Hz: 1.90%
100Hz: 0.49%

1% Full Power (2.45V)
2nd Harmonic
70Hz: 0.91%
100Hz: 0.04%
3rd Harmonic
70Hz: 1.28%
100Hz: 0.44%
Crossover     Integral 2nd order passive, 160 Hz
Transducer     1x 200mm (8.00") Long throw woofer with multi fibre paper pulp cone
Physical
Enclosure
Backcan     Zinc plated steel
Baffle     Reflex loaded UL 94V-0 rated ABS
Grille     Steel, with weather resistant coating
Safety Features     Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design     Security toggle clamp
Backcan Options     
Blind Mount (BM)     Complete with fixed back can
Pre Install (PI)     Separate back can for pre-installation
Cable Entry Options     Cable clamp & squeeze connector for conduit up to 22mm
Conduit Knockouts     3 Sets of horizontal positions 19 / 22 / 28mm
0.75 / 0.87 / 1.10"
Connectors     Removable  locking connector with screw terminals with "loop through" facility
Safety Agency Ratings      UL-1480, UL-2043, CE
BM Hole cutout Diameter     295mm (11.61")
PI Hole Cutout Diameter     295mm (11.61")
Dimensions     
Bezel Diameter     325mm (12.80")
BM model: Front of ceiling to rear of back can     310.5mm (12.22")
BM model: Front of ceiling to top of safety loop     327.8mm (12.90")
PI model: Front of ceiling to rear of speaker unit     117.50mm (4.63")
PI model: Front of accessory back can bezel to top of safety loop (PI)     168.5mm (6.63")

UPC: 503586614730


Manufacturers

Customer Service

Customer Support - New Audio Video