Inground Subwoofer with 10" driver
The GO10SW features a woofer with low-heat design is vented through the “chimney,” providing a constant flow of fresh air while always protecting the system from harsh weather and water. The flared chimney port system, combined with our polypropylene cone woofer with a high-intensity magnet structure, delivers deep, musical bass without chuffing or extraneous vibration. Bury the subwoofer nearby, or install it under your decking, and rock the very ground beneath your feet!
Inground subwoofer with single high excursion driver (band-pass), 5/8” (14.3 cm) thick high-density polyethylene (HDPE) enclosure
±3 dB from 33 Hz - 135 Hz
Low Frequency Driver
10" (25.4cm) high compliance, mica-filled polypropylene with stitched Nitrile-Butadiene Rubber (NBR) surround, 2" high-power oversized voice coil, 4-layer on fiberglass bobbin
Low Frequency Extension
Room / Anechoic
88 dB / 82 dB
Suitable Amplifier Power Range
15 - 1000 watts
Maximum Input Power
Textured Copper Color (canopy only)
24" × " × 18"
(60.9cm × cm × 45.7cm)