Imagine S Surround
Flexible Tri-Mode Connections
The Imagine S surround speaker offers exceptionally high performance with a broad range of wiring and placement options. For example, this Tri-mode Surround™ design allows for easy bipole or dipole wiring and placement. In addition, it offers the possibility of using one pair of Imagine S for 6.1/7.1 surround sound systems by wiring the forward firing baffles for the side surround channels and the rear firing baffles for the rear center surrounds.
Specifications
Frequency Response (Anechoic Chamber)
On Axis @ 0°±3dB 5-23,000Hz
On Axis @ 0°±1 1/2dB 68-20,000Hz
Off Axis @ 30°±1 1/2dB 68-10,000Hz
LF Cutoff -10dB 58Hz
Sensitivity (1W (2.83V) @ 1M, IEC-Filtered pink noise, C-weighted
Anechoic Chamber 87dB
Listening Room 89dB
Impedance
Nominal 8 Ohms
Minimum 4 Ohms
Input Power (RMS, Clipping <10% Time)
Recommended Program 20 - 150 Watts 150 Watts
Acoustic Design
Tweeter (Nominal) 1” (25mm) Titanium Dome with Ferrofluid Neodymium Magnet
Woofer (Nominal) 2 x 5 1/4” (133mm) Clay/Ceramic reinforced Polypropylene Cone Rubber Surround
Crossover 2,000Hz, B3
Internal Volume 0.22 cu ft (6.2L)
Design Type Sealed
Size (W x H x D) 10 3/4 x 12 3/4 x 7 1/8” 273 x 321 x 178mm
